| Author | Message | ||
     John Winningham Rating: N/A |
I just got a set of SVGA 3D I-glasses from cwonline... have a few problems that I was hoping someone here might be able to help me with: 1) The left lens has some junk on it in two different depths. 2) The bottom of the "screen" is blurry, but the top is quite clear. If I move the glasses lower, I can see the bottom of the screen correctly but the top is cut off. (Not to mention it doesn't fit right this way) 3) The entire screen seems like its rotated a few degrees clockwise. Causes a little disorientation. Oh, and for anyone who doesn't have one, the "screen size" is very comparable to a 17" monitor sitting on the desk in front of you. | ||
| newguy Rating: N/A |
That's it John Winningham? that's all you have to say about the glasses? Are you getting a new pair? So if your comparing it to a 17" infront of you , is that a bad thing? NG | ||
| John Winningham Rating: N/A |
I have replied in the General discussion forum at the following link: http://www.stereo3d.com/discus/messages/21/1727.html?1041842918 The problems are no more and the subject has gone more towards general discussion.  |
