What happed to the Nu-View? Log Out | Topics | Search
Moderators | Register | Edit Profile

stereo3d.com webboard » 3D Movies & Video » What happed to the Nu-View? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Nahie (Nahie)
New member
Username: Nahie

Post Number: 1
Registered: 6-2007

Rating: N/A
Votes: 0 (Vote!)

Posted on Tuesday, June 05, 2007 - 9:52 pm:   Edit PostDelete PostView Post/Check IPPrint Post

Does anyone make this product anymore, and what happened to the company that made them? Is the 3D this product generates any good?
Top of pagePrevious messageNext messageBottom of page Link to this message

Charles Arrants (Charles)
Member
Username: Charles

Post Number: 48
Registered: 5-2006

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, June 06, 2007 - 2:19 am:   Edit PostDelete PostView Post/Check IPPrint Post

The Nu-View Camcorder Adapter was originally made by a defunct company called 3D Video, Inc. Production of the adapter was then taken over by I-O Display Systems, but has now been discontinued. Two Korean companies released -- or planned to -- similar adapters several years ago, but even if still in production, they aren't available in the U.S. Used Nu-View adapters may be offered from time to time on eBay.

The genuine 3-D image obtained with the NuView was quite good overall, but the optics it used to split the left-right images sometimes resulted in reflection artifacts in one eye. (The Razor3D 3-D DVDs "Camp Blood," "Zombie Chronicles," and "Hunting Season," among other titles, were shot using the Nu-View adapter, so you can judge the results for yourself if you want to purchase one of these these cheap DVDs.)
Top of pagePrevious messageNext messageBottom of page Link to this message

Michal Husak (Husakm)
Intermediate Member
Username: Husakm

Post Number: 71
Registered: 4-2006


Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, June 06, 2007 - 12:42 pm:   Edit PostDelete PostView Post/Check IPPrint Post

We still have NuView attachment in stock.
Top of pagePrevious messageNext messageBottom of page Link to this message

3d-geek (Rrrrob)
Member
Username: Rrrrob

Post Number: 54
Registered: 5-2006

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, June 06, 2007 - 3:10 pm:   Edit PostDelete PostView Post/Check IPPrint Post

There is a seller at Ebay that also still has it for sale...ultimate3Dheaven
Top of pagePrevious messageNext messageBottom of page Link to this message

3d-geek (Rrrrob)
Member
Username: Rrrrob

Post Number: 55
Registered: 5-2006

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, June 06, 2007 - 3:12 pm:   Edit PostDelete PostView Post/Check IPPrint Post

P.S.: I bought one a few years back, and I like it quite a bit...the 3D is great, and you can even change it to anaglyph with the various software programs (i.e., freeware program Stereo Movie Maker).
Top of pagePrevious messageNext messageBottom of page Link to this message

Greg Kintz (Gregk)
New member
Username: Gregk

Post Number: 9
Registered: 5-2006

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, June 06, 2007 - 5:16 pm:   Edit PostDelete PostView Post/Check IPPrint Post

The Nu-View has it's pros and cons-

CONS-

There's a loss of light. About one F-stop if I were guess. Not a problem outside, but make sure indoor shooting is well lit.

The L/R cancellation is not 100% with high contrast material. This can be somewhat compensated for by putting high contrast material at the stereo window (converged) so it isn't an issue. If you have the software, one could later re-converge in post.

The random cloud or polarized reflections mentioned earlier in this thread, along with lens reflections that can occur when light reflects into the Nu-View's housing unit.

Make sure your camera lens is close to 37mm (the lens size the Nu-View was optimized for), or be sure to stay zoomed in so you don't see the housing on the edges of your image. After the 52mm lens size, you'll need to jury rig an adapter of some kind to keep it on.

Keep the supplied alignment screw handy! No matter how much you baby the Nu-View, sooner more than later, you'll need to re-adjust the lenses to keep vertical alignment intact. It's not a hard task, but just don't set it and forget it...

There's some other minor technical drawbacks, but I'd say these are the biggest.

PROS-

For a couple of hundred bucks you're shooting true 3-D video!! That is not to be understated. I have been shooting with two video cameras for a couple of years now.. But it's worth noting my set-up requires two expensive cameras, a LANC, a special 3-D rig, monitoring etc, and needs to be dumped into a computer to be converted to whatever 3-D format I want. While my method is superior in almost every way, I can still very much appreciate the simplicity and low cost of a Nu-View adapter. And after shooting your Nu-View 3-D video, being able to take the tape out and immediately watch your newly shot footage in true full color 3-D.

The Nu-View has a convergence adjustment. Soooo many people fail to use it, and it's a real shame, as convergence makes a big difference with 3-D video.

Don't let the above warnings scare you, as I do not regret my Nu-View purchase in the least. If you want to try 3-D video, this is the perfect way to "get your feet wet".

-Greg-
Top of pagePrevious messageNext messageBottom of page Link to this message

Nahie (Nahie)
New member
Username: Nahie

Post Number: 2
Registered: 6-2007

Rating: N/A
Votes: 0 (Vote!)

Posted on Wednesday, June 06, 2007 - 9:36 pm:   Edit PostDelete PostView Post/Check IPPrint Post

Thanks for the info. Looks like I'll have to get one to try it out!
Top of pagePrevious messageNext messageBottom of page Link to this message

Carsten Meyer (Cyberhaven)
New member
Username: Cyberhaven

Post Number: 1
Registered: 6-2007

Rating: N/A
Votes: 0 (Vote!)

Posted on Thursday, June 07, 2007 - 9:20 am:   Edit PostDelete PostView Post/Check IPPrint Post

We have the StereoCam UL-100 in stock
http://www.stereo3D.com/stereocam.htm

http://www.cyberhaven.de/3D/aufnahme.htm

Carsten
Top of pagePrevious messageNext messageBottom of page Link to this message

3d-geek (Rrrrob)
Member
Username: Rrrrob

Post Number: 56
Registered: 5-2006

Rating: N/A
Votes: 0 (Vote!)

Posted on Thursday, June 07, 2007 - 2:42 pm:   Edit PostDelete PostView Post/Check IPPrint Post

ah yes, indoor filming can be VERY dark. However, my sony camcorder allows me to increase the exposure setting, which compensates for the darkened image coming through the lens, thus allowing me to film in 3D without having to use stadium lighting indoors.

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and moderators may post messages here.
Password:
Options: Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Last Week | Tree View | Search | User List | Help/Instructions | Program Credits Administration