Cybermind Visette Pro Power Supply

Log Out | Topics | Search Moderators | Register | Edit Profile

Author Message   David Lloyd (Davidjlloyd) New member Username: Davidjlloyd Post Number: 1 Registered: 9-2015 Rating: N/A Votes: 0 (Vote!) Posted on Thursday, September 24, 2015 - 9:03 am:    Hello I have brought an old Cybermind Visette 2e on ebay, including MMD distribution box but without a power supply. I can build one but need to find out what the pin out is. The connector is an 8 pin molex. Any ideas? Anyone have one and a multimeter they can check it for me? Thanks David   David Lloyd (Davidjlloyd) New member Username: Davidjlloyd Post Number: 2 Registered: 9-2015 Rating: N/A Votes: 0 (Vote!) Posted on Friday, October 16, 2015 - 8:41 am:    Following on from the above I dismantled the control unit and traced out the voltages from the fuses (which are marked with their voltages on the front of the unit) and adapted a similarly specced PSU connector and now it is working! OR at least partially. The left display works but the right one does not do anything. Before I go diving inside can anyone comment on likely problem or type of LCD display that's in there? Thanks, David

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and moderators may post messages here. Password: Options: Enable HTML code in message Automatically activate URLs in message Action: