| Author | Message | ||
     Biv Vibov (Bivvib) New member Username: Bivvib Post Number: 1 Registered: 8-2006 Rating: N/A |
Hi everybody, I have the following problem: when I plug the connector/dongle of the X3D Stereo Glasses into the VGA port of my GeForce 6100 card (integrated on the motherboard: Asrock K8NF4G-SATA2), on the monitor I become automatically an interlaced mode switched on and the glasses start to flicker. This happens even on system start (before any OS is loaded). I've used these stereo glasses on GeForce2 MX 200 and GeForce4 MX 440-SE and they ran perfectly. I guess that VGA sends some signals to start the interlaced stereo mode, but I'm not sure. I contacted with nVidia support and they told me that this isn't their problem - I should have asked Asrock! Do you have any idea how to make them work? Perhaps to "switch" something in the BIOS, on the motherboard or should I do it by myself? Thanks in advance. P.S. I guess that the same problem will have the e-Dimensional 3D glasses because the dongle and drivers look very similar to these of X3D. (Message edited by bivvib on August 29, 2006) (Message edited by bivvib on August 29, 2006) |
