| Author | Message | ||
     Anonymous Rating: N/A |
hi there i lost the pass through connection cable that came with my 3d revelator. i still have the glasses and the IR connector thing. is there any way to build one of those connectors myself? i got some VGA connectors here which i could waste for trying to connect it with, but i would need a scheme for the cables i'd need. anyone got such a plan or could give me a link? thanks in advance | ||
| Andreas Schulz Rating: N/A |
Hi ! I have collected some related information on this page - though it may be a little difficult to find the mini-DIN3 socket, so you would either have to solder the IR emitter cable directly to the VGA piggy-pack or, if you want a removable connection, replace it with a 3.5mm stereo plug/socket pair. Andreas | ||
| Anonymous Rating: N/A |
ahh! looks good. many thanks to you. i'll try it at once and post whether i had success  | ||
| Anonymous Rating: N/A |
doh! the connectors on the voodoo loop cable are encased in solid plastic making it unable to solder ANYTHING to it. now i have an unshielded voodoo2 loop cable and some nice colourful cables that i can't associate with the pin layout  you got any resource for those colour codes? perhaps there's a possibility with just trying the cables *sigh* | ||
| Anonymous Rating: N/A |
yay! i did it. finally figured out which cables where the right ones. my revelator is finally back up and running. thanks to your page for the cable layouts (revelator adapter). | ||
| Anonymous Rating: N/A |
I have admire your unselfishness in taking the time to make this web site. |
