| Author | Message | ||
     Jason Van Horn (Immortaljman) New member Username: Immortaljman Post Number: 2 Registered: 7-2011 Rating: N/A |
I can't get the files to play in dual output option on my projectors when I put the player into fullscreen mode. I've used left and right files encoded in .mkv and 3D bluray ssif files, they start to play fine in windowed mode but once I set it to fullscreen mode, the screens go black and the player stops playing. It doesn't freeze, but just sits there. I'm not sure what's happening. Has anyone experienced this issue before? | ||
| Larry Elie (Ldeliecomcastnet) Senior Member Username: Ldeliecomcastnet Post Number: 152 Registered: 10-2006 Rating: N/A |
Yes, I have seen this. In my case, the movie was set up for too high of a resolution/bandwidth for my hardware. Re-render the file at a lower size an the problem goes away. BTW, if what I guess is correct, if you leave the program windowed, it will also freeze in a minute or so. | ||
| Jason Van Horn (Immortaljman) New member Username: Immortaljman Post Number: 3 Registered: 7-2011 Rating: N/A |
Well, I don't really want to lower the size and the hardware I'm using is extremely beefy. I'm not sure that could be the problem. The other thing that makes me believe that isn't the case is because it happens with ssif files as well. Peter developed it so that it could use those too, and they are the same size, bit rate and resolution. The same thing happens when I try ssif files as well. If it's in windowed mode it plays fine the whole time, but it will stay in 2D or it will play them in anaglyph format the whole time. I sent Peter a description of the bug to see if he could replicate it. I'm going to try some other files with as dense of bit rate but a different format to see if it's the MKV container that's the problem. I'm also wondering if there's other codecs that it's having a problem with that's interrupting the process. I'll try that tonight and report what happens. | ||
| Jason Van Horn (Immortaljman) New member Username: Immortaljman Post Number: 4 Registered: 7-2011 Rating: N/A |
Well, I did figure out the problem and it had to do with setting the dual output option to the Stereobright Dual Output setting. For some reasont that just froze it. After selecting just the regular format, it performed brilliantly. Hope this helps someone else out there. |
