| Author | Message | ||
     stuart_g Rating: N/A |
I have a Benq 17" flatscreen LCD monitor, I cant seem to find any Glasses or Anything to support 3D with this monitor does anyone have a solution without geeting A crt monitor? | ||
| Christoph Bungert (Admin) Rating: N/A |
Anaglyph (red/green, red/blue) Autostereogram (magic eye) side-by-side and some lens-system Sometimes shutterglasses do work on LCD's to some extend at 60 Hz, but don't count on it. Christoph | ||
| Anonymous Rating: N/A |
The issue here is also one of polarisation as polarising filters are used to improve contrast on the Benqs and LCDs generate polarised light. The shutter glasses are also LCD based and are polarised. If you look at a normal monitor with the glasses on and put a polarised sunglass lens in front and rotate the light blacks out and then comes back. Hence if you use shutterglasses with an LCD monitor you get these problems as well. Check out http://www.diyaudio.com/forums/forumdisplay.php?s=6b2d28d2bf75bee591df1c2d075c9d22&forumid=20 Do a search on polarised or polarized... If you strip the LCD down you can remove these sheets it may work better - but this is a lot of delicate work. The AV forum about building your own projection system goes in some depth about this aspect of LCDs. edimentional have said that they are working on an LCD driver for people who have bought their glasses. Release date is sometime this year i.e. when they have been completed... http://forums.stereovision.net/viewtopic.php?topic=1059&forum=2 | ||
| Ed Rating: N/A |
Try the mirrored viewers here: http://www.berezin.com/3d/screenscope.htm They work on split screen mode. |
