| Author | Message | ||
     Ozzie Rating: N/A |
A few months ago I upgraded my PC with a new motherboard, CPU and AGP graphics card retaining my wicked3d voodoo2 and the eyescreem glasses. I have only recently again tried to get the stereo working again and found I could not. I get a black screen on system start up. No pass through at all. I thought it must have been the controller,(sync-doubler VGA-dongle). and traced down a new one. I also purchased a stabilised power adaptor, as I have read the controler is sensitive to the current. It still does not work. I have checked that there is power getting to the controler and there is a signal passing through the controler. Questions: 1.Do any S3 video cards have a problem with the controler, or visa versa. ie; Passing through the VGA signal? 2.Can the wicked3d Voodoo board cause this problem via any faults. 3.Can it still be a power problem. I am in Australia.Ive tried 9v 200mA down to 6v 200mA I have tried other video cards but the only ones I have to test with are all S3, Titan 4000, diamond stealth (Verge DX)etc. Any suggestions before I go looking for a further controlers. And if I do need to get a further controler any suggestions other than Eyescreem. I have had too much trouble with this system. Ozzie |
