| Author | Message | ||
     MrMVD Rating: N/A |
Is anybody knows, why GLDirect 2.0 tells me: "No SciTech Nucleus Graphics driver could be loaded for the installed graphics board's chipset. Only Anaglyph stereo modes are available with this generic graphics configuration." and don't let me to enable stereo modes? I use GeForce2 board, and trying LCD shutter glasses. HELP ME!!! | ||
| Alexander Oest Rating: N/A |
Have you installed a stereo driver? It could sound like you've set GLDirect to run with a stereo driver without actually having any. It works for me with Nvidia's generic GeForce drivers plus their stereo driver. (can be downloaded from www.nvidia.com) Alex | ||
| MrMVD Rating: N/A |
Yes, I installed stereo driver, but GLDirect don't require stereo drivers to be installed. It works, because it supports GeForce 256 and DDR and don't support GeForce2. That is why I need solution | ||
| Anonymous Rating: N/A |
Thers is no solution, GLDirect does not support the GeForce2 as of yet. | ||
| Olivier Benoit Rating: N/A |
Dear Anonymous your informations are a little out off date. Since end July GLDirect (version b35) does support the GeForce2. I am using GLdirect with a Geforce2 pro. Stereo Enabled Graphics Hardware drivers, which enable stereo features on the following graphics chips: 3DLabs Permedia 2, Permedia 2V ATI 3D Rage IIC, 3D Rage Pro, 3D Pro, Rage Mobility, Rage XL ATI Rage 128, Rage 128 Pro, Rage Mobility 128, Rage Mobility 128-D4x Cirrus Logic Laguna 5465 Matrox MGA-G100, MGA-G200, MGA-G400, MGA-G450 NVIDIA RIVA-TNT, RIVA-TNT2, RIVA-TNT2 M64, RIVA-TNT2 Vanta NVIDIA RIVA-TNT2 Ultra, GeForce 256, GeForce DDR, Quadro NVIDIA GeForce2 GTS, GeForce2 MX, GeForce2 Ultra Rendition Verite V1000, Verite V2200 S3 Virge/GX2 | ||
| MrMVD Rating: N/A |
DAMN! Now I am using GeForce3. What the hell? Am I need to sell it back? | ||
| Giorgio Bogoni Rating: N/A |
Oliver, you wrote "ATI Rage Mobility". I tried GLDirect (downloaded abot 2 weeks ago) on an ACER737 Notebook featuring ATI Rage Mobility 8 Mb graphic board. It installs correcly but, even anaglyph test, sometimes shows fine (two superimposed images) and sometimes wrong (only one of them). Trying to run QUAKE3 in anaglyph mode if freezes the machine. Any suggestion? And another question. You wrote "Quadro"; a friend of mine is going to buy a Quadro2EX by Elsa (Synery III) ... what's the difference between a Quadro and a Quadro2EX? Had I to aspect GLDirect to work with this graphic chipset? And the last question. To get an high refresh rate running GLDirect in a dual monitor fashion (two projectors connected for polarized projection) I need, of course, an HW with a good Direct3D support. Can you give me an example of a graphic board that can make me play, for example, Quake in this way? THX, Giorgio. | ||
| Maart Rating: N/A |
I couldn't get quake running on my ati rage mobility (8MB) too, but tombraider works great and the phantom menace, I think some games just need more graphic hore power than the mobility can offer If you can tell me what games ran smooth on your mobility chip please share. Maart | ||
| Maart Rating: N/A |
I couldn't get quake running on my ati rage mobility (8MB) too, but tombraider works great and the phantom menace, I think some games just need more graphic hore power than the mobility can offer If you can tell me what games ran smooth on your mobility chip please share. Maart | ||
| Oliver Benoit Rating: N/A |
I just picked the list from the docs of Gldirect. The problems with rage mobility maybe due to the small amount of video memory (8mb), i also had some problems with a fireglpro due to the small amount of video memory (8mb), . Quadro cards are "based on "modified" geforce chips". quadro=>geforce1 quadro2=>geforce2 (quadro2ex=>geforce2mx) quadrodcc=>geforce3 |
