| Author | Message | ||
     KuDawg Rating: N/A |
Hi guy's been awhile since i've posted here.. I wanted to know, because I havn't tried it out yet. If i could get a 3d effect on my projector. It has all the connectors you need . I usally play my pc games on it as I can hook my monitor up to it or alone just have the VGA cord go straight from the video card to the projector or witout the use of the monitor. I do have a Asus video card 7700 model. I have the reveolators glasses. Let me if anyone know's before I try this out.. tnx | ||
| Alexander Oest Rating: N/A |
Give it a try! If it's a DLP or CRT projector (i.e. NOT LCD) and if it's without an internal frame rate converter (not likely), you stand a good chance. Alex | ||
| Eric Lindstrom Rating: N/A |
I agree. Even if you get some flicker, it should work. If the filcker is realy bad, you can bring the contrast down on the projector. Just start at 640x480 resolution, and bring the resoulution up until you have the highest resolution with tolerable flicker. Also, try using a program like HzTool or SciTech Display Doctor to boost the refresh rate of the projector, and that you have the latest drivers installed for the projector as well. Good Luck, -Eric L. | ||
| Christoph Bungert (Admin) Rating: N/A |
I'm not aware of a VT 4400, but there's a VT 440 which is a LCD projector. So ASUS board and shutterglasses are out of the question. Christoph | ||
| KuDawg Rating: N/A |
Yes my fault it's the vt440 lcd. So I guess it wont work. |
