| Author | Message | ||
     Michal Husak Rating: N/A |
I have found that VFX3D colud accept not only interlaced progresive stereo image, but that it could work in two stereoscopic modes: 1) normal interlaced image on the monitor, it can make de facto line-blanking in this situation (progresive stereo image) 2) HW page fliped stereo (Yes, Relevator generic stereoscopic drivers shuld work ! + the VFX3D joystick emulation for headtracking !) It is nessesery to go to 640x480 mode and have refresh rate in the range 60-75 Hz ... There is evcose no flickering in 60Hz mode becouse the signal is demultiplexed to 2 LCD screens ... It looks like the electonic in the VFX3D box can distinquish betwen the HW page fliped and progresive interlaced signal ... I have unfortunately found a small problem, VFX3D sometimes can not sync to the monitor and it display stereo in mono, even when switched internaly to stereo. Switching VFX3D on/off usualy helps ... |
